Sr Hardware Engineer

Product development & Services is hiring Sr Hardware Engineer job in Bengaluru (Bangalore) | Cutshort

Sr Hardware Engineer
Product development & Services
Sr Hardware Engineer

at Product development & Services
Agency job
5
\- 7 yrs
₹7L - ₹12L / yr
Bengaluru (Bangalore)
Skills
FPGA
Express
DDR SDRAM
TCI
Position: Senior Hardware Engineer
Requirement: Immediate joining
Job Description for the above position:
➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.
➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.
➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.
➢ Excellent component selection and decision-making skills.
➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must
Requirement.
➢ Experience in a range of technologies including digital, analog and power electronics.
➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.
➢ Excellent knowledge of electronic circuits and analysis.
➢ Familiarity and Experience with Altium Designer and Allegro tools.
➢ The ability to work with software engineers to design and debug systems.
➢ Experience in Thermal analysis, Load analysis and Timing analysis.
➢ Knowledge of Signal integrity and power integrity.
➢ Experience in system-level design, logical design etc.
➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.
➢ Good knowledge of EMI/EMC testing procedures and Certification standards.
➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.
➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE
video standards a plus.
➢ Hands-on experience in design/troubleshooting/updating hardware.
➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.
➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.
➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...
➢ Strong knowledge on layer stack-up build.
Qualification:
➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person
Specification/Competencies:
➢ Self-motivated
➢ The ability to work independently, within or lead the team.
➢ Well organized
➢ Strategic thinker.
➢ Proactive
➢ Ability to manage multiple tasks and work toward long-term goals.
➢ Excellent communication skills (verbal and written)
➢ Solid understanding of engineering fundamentals and technical problem-solving skills.
➢ Experience in establishing and sustaining strong relationships with the extended team.
Read more
Users love Cutshort
Read about what our users have to say about finding their next opportunity on Cutshort.

Shubham Vishwakarma
Full Stack Developer - Averlon
I had an amazing experience. It was a delight getting interviewed via Cutshort. The entire end to end process was amazing. I would like to mention Reshika, she was just amazing wrt guiding me through the process. Thank you team.
Companies hiring on Cutshort

Similar jobs

IT Services Industry
Agency job
Hyderabad
10
\- 12 yrs
₹20L - ₹35L / yr
Signal integrity
Systems analysis and design
Schematic
Hardware
EMI
+16 more
Required Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination
Criteria:
– Education: B.Tech / M.Tech in ECE / CSE / IT
– Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
– Proven expertise in digital, analog, and power electronic circuit analysis & design
– Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
– Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
– Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
– Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
– Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
– Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
– Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
– Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
– Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
– Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components
Description
REQUIRED SKILLS:
• Extensive experience in hardware board designs and towards multiple product field deployment cycle.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.
Education Requirements:
B. Tech / M. Tech (ECE/ CSE/ IT)
Experience - 10 to 12 Years
Read more

Semi-Conductor Industry
Agency job
Hyderabad
10
\- 12 yrs
₹30L - ₹35L / yr
Signal integrity
Systems analysis and design
Schematic
Python
Perl
+113 more
MANDATORY CRITERIA:
– Education: B.Tech / M.Tech in ECE / CSE / IT
– Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
– Proven expertise in digital, analog, and power electronic circuit analysis & design
– Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
– Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
– Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
– Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
– Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
– Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
– Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
– Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
– Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
– Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components
DESCRIPTION:
COMPANY OVERVIEW:
The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.
REQUIRED SKILLS:
– Extensive experience in hardware board designs and towards multiple product field deployment cycles.
– Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
– Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
– Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
– Completed at least two project from high-level design to final product level deployment.
– Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
– Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
– Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
– Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
– Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
– Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
– Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
– Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.
Read more
![Cornertree](https://cutshort